PCM Series Pipe Cutting & Beveling Machine
Product Overview
Solve your business pain points through innovative technical solutions
The PCM series pipe cutting & beveling machine features a compact design and easy operation. After continuous upgrades, optimization, and more than a decade of iterative updates, this series offers extremely high machining accuracy, stability, operability, and cost-effectiveness. It meets the needs of fixed in-plant operations while also being convenient for mobile use on construction sites. In addition, the equipment line is comprehensive, covering pipe diameters from Ø34mm to Ø930mm. The machining method keeps the pipe clamped stationary while the cutter disc drives the tool holders to rotate, achieving mechanical ratchet feeding. It is mainly used for pipe cutting and bevel processing. It can perform cutting and beveling simultaneously at any position along the pipe, or perform only pipe cutting, or only beveling of the pipe end.
Product Brochure
Showcasing product details and real application scenarios from multiple angles
Product Specifications
Overview of models, specifications, and technical performance metrics
| Model | PCM-6 | PCM-12 | PCM-16 | PCM-24 | PCM-32 | PCM-36 |
|---|---|---|---|---|---|---|
| Applicable Pipe Diameter | DN30-150 | DN40-300 | DN80-400 | DN300-600 | DN500-800 | DN600-900 |
| Processing Material | Carbon steel, alloy steel, stainless steel, duplex stainless steel, low-temperature steel, heat-resistant steel, etc. | |||||
| Processing Wall Thickness | Stainless steel/alloy steel 3-25mm, carbon steel 3-30mm | |||||
| Processing Efficiency |
Calculated based on pipe wall thickness, the feed speed is approximately 2mm/min.
Taking a Φ219*8mm pipe as an example, the time for cutting + beveling is about 4min
|
|||||
| Clamping System | Electric multi-jaw self-centering clamping system, installed on the main machine body together with the cutter disc | |||||
| Number of Tool Holders | One set of cutting tool holder, one set of beveling tool holder | |||||
| Cold Cutting Method | Recirculating water cooling | |||||
| Feed Rate | 0.1~0.2mm/r | |||||
| Bevel Type |
I/V/Double-V
(Standard configuration: 0° cutting tool and V-type 30° beveling tool)
|
|||||
| Machining Accuracy | Bevel end-face perpendicularity ≤ 1mm; surface finish ≤ Ra6.3; angle deviation ≤ 0.5° | |||||
| Feeding Method | Rotary radial automatic feeding; the pipe remains clamped and stationary, the cutter disc rotates electrically, and the tool feeds inward layer by layer | |||||
| Operation Mode | Control box switch buttons, easy to operate | |||||
| Height Adjustment | Adjust the machining main unit up and down manually or electrically to meet center-height adjustment for pipes of different diameters | |||||
| Optional Accessories |
Manual pipe conveying roller table
Electric pipe conveying roller table
Mechanical fixed-length mechanism
|
|||||
※Due to continuous product iteration and upgrades and differing operating conditions among users in different industries, configurations and performance parameters are subject to the product ordered.
Download Materials
Get the Detailed Product Manual
